*NOTE: EARLIER MODELS (UP TO APPROXIMATELY 1999) MAY REQUIRE STEER SHOCK HV2025. IF THE STATIC HEIGHT OF THE SHOCK
IS GREATER THAN 590mm, THEN PART HV2025 MUST BE USED. HV511 & HV1011 WILL ONLY SUIT APPLICATIONS WHERE THE STATIC
HEIGHT IS LESS THAN 590MM
**NOTE: HV2011 WILL FIT MOST SAR MODELS, HOWEVER THE SHOCK MUST BE FITTED UPSIDE DOWN TO ALLOW CLEARANCE FOR
THE SIDE CHAMBER. NOTE THAT SOME NEW SAR MODELS HAVE INSUFFICIENT CLEARANCE FOR SIDE CHAMBER ALTOGETHER.
CHECK YOUR SPECIFIC APPLICATION.

To find the correct parts for you for Kenworth applications, a VIN or what's also called a chassis number is required to identify most parts to ensure that, all we require is the last 6 digits that start with a 4 at the end of this number to enter it into our system.